Samsung Washer Dryer DC68 02196A User Guide

WASHING MACHINE  
User’s Manual  
FEATURES  
1
2
3
SAFETY INSTRUCTIONS  
DESCRIPTION OF PARTS  
CONTROL PANEL  
4
WASHING PROCEDURE  
Fuzzy(Digital) course  
Blanket course  
5
5
5
Super clean course  
5
Speedy course  
5
Wool course  
5
Delay start course  
6
Silver Wash button  
6
MANUAL FUNCTIONS  
INSTALLATION & MAINTENANCE  
Environment  
7
8
8
Levelling  
8
Connecting the water supply hose  
Assembling the rat protection panel  
In case of pump-drained washer  
Connecting the drain hose  
How to put the detergent in  
Water supply connector filter  
Cleaning the filter net.  
How to clean the filter  
TROUBLESHOOTING  
SPECIFICATIONS  
8
9
9
9
9
Please read this manual before using and note  
how to use in the proper manner.  
Please be careful of keeping the manual.  
Otherwise, it should be bought separately.  
10  
10  
10  
11  
The User’s Manual is for common use.  
Make use of the User’s Manual depending upon your washing machine model.  
Register your product at  
CODE NO. : DC68-02196A  
 
SAFETY INSTRUCTIONS  
Please note that the following precautions for safety intend to prevent unpredictable danger and damage  
by helping the proper use in safety.  
When using hot water in washing, please make sure that the water should not exceed 50˚C.  
Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.  
WARNING  
CAUTIONS  
There might be a slight injury or damage when you  
violate this instruction.  
There might be serious injury or fatal accident when  
you violate this instruction.  
If the plug (power supply cord)is damaged,it must  
be replaced by the manufacturer or its service  
agent or a similarly qualified person in order to  
avoid a hazard.  
Don’t install it in the area with moisture or outdoor  
where it has rain or snow  
-An electric shock or a fire may take place.  
Please unplug the power supply cord when you  
do not use it.  
Do not pull the cord off or touch it with moist hands.  
-An electric shock or a fire may take place.  
-An electric shock or a fire may take place.  
Do not bend the power supply cord by force or  
If there is dust or water on the power supply plug  
and its connected part, please remove it com-  
pletely.  
-An electric shock or a fire may take place.  
Do not make your kids look into the inside of the  
washer.  
press it with heavy things.  
-An electric shock or a fire may take place.  
Do not install the washer nearby electric implement  
or don’t put a candle light or cigarette light on the  
washer.  
-A fire may take place.  
-If your kid falls into the washer, his life could be  
in danger.  
Do not disassemble, repair or remodel it recklessly.  
-When you need to repair it, please call service  
agent. An electric shock or a fire may take place.  
Ventilate immediately without touching the power  
plug if gas is leaking.  
-An electric shock or a fire may take place if it  
catches flame.  
During operation, do not put your hands or metal  
materials under the washer.  
-You may be hurt by spinning board beneath the  
If the washer makes strange noise, smell or  
smoke, unplug it promptly and call service agent.  
-An electric shock or a fire may take place.  
When cleaning, don’t spray water to the parts of  
the washer directly.  
washer.  
Stay away from the washer when the bottom of  
the washer sinks into the water.  
-There might be an electric shock. Please wait  
until the water drains out completely.  
-It may make it’s life span shorten. Also an electric  
shock or fire may take place  
Do not put laundry stained with gasoline, ben-  
zene, or alcohol in the washer, and keep the  
materials away from the washer.  
Don’t use several appliances together with an outlet.  
-A fire may take place due to unusual heat.  
-An explosion or a fire may take place.  
Don’t press the button with an awl or pin.  
-An electric shock or a fire may take place.  
During spinning, don’t put your hand in the spinning tub.  
-It may hurt your hands. If it does not stop within  
15 seconds after you open the lid, call service  
agent immediately.  
Use the new hose-sets and old hose-sets should  
not be reused.  
Connect the grounding wire to the shell plate, and  
bury it under at least 25cm of earth:elternatively,  
connect the ground wire to the appropriate pin on  
a properly grounded power receptacle. Never con-  
nect the wire to a telephone line, lightning rod, or  
gas pipe.  
This appliance is not intended for use by young  
children or infirm persons unless they have been  
adequately supervised by a responsible person to  
ensure that they can use the appliance  
safely.Young children should be supervised to  
ensure that they do not play with the appliance.  
This appliance has to be connected to the plug  
endurable to proper power consumption.  
This appliance has to be positioned so that the  
plug is accessible after installation.  
2
 
DESCRIPTION OF PARTS  
The User’s Manual is for common use.  
Make use of the User’s Manual depending upon your washing machine model.  
3
 
CONTROL PANEL  
For more details, see control panel of your washing machine.  
POWER BUTTON  
POWER  
Press this button once to operate.  
Press once again to turn the power off.  
START/  
HOLD  
START/HOLD BUTTON  
Use to pause and restart the operation.  
To change the washing procedure during operation, press this button to stop,  
and once again to restart after changing the procedure.  
DELAY  
START  
DELAY START BUTTON  
Press this button when delay start washing is needed.  
COURSE  
COURSE SELECT BUTTON  
With every press of this button, the washing course changes;  
FUZZY(DIGITAL) BLANKET SUPER CLEAN SPEEDY WOOL  
FUZZY(DIGITAL)  
SILVER WASH BUTTON  
A course where silver water is supplied in washing as well as the last rinse,  
SILVER  
WASH  
featuring sterilization and antibacterial coating.  
This is available for all courses except the Wool course.  
FUNCTION  
FUNCTION SELECT BUTTON  
With every press of this button, the function changes:  
SOAK&WASH&RINSE&SPIN WASH RINSE SPIN WASH&RINSE RINSE&SPIN  
WASH&RINSE&SPIN SOAK&WASH&RINSE&SPIN  
WATER  
LEVEL  
WATER LEVEL SELECT BUTTON  
According to the washload,select the water level ;  
MEDIUM HIGH MAXIMUM EXTRA LOW LOW  
WATER SUPPLY SELECT BUTTON  
As you press this button, the type of water is selected as follows.  
WATER  
SUPPLY  
COLD COLD + HOT HOT COLD  
REMAINING TIME INDICATOR LIGHT  
The indicator light shows the remaining time (in minutes) of each wash cycle.  
At the end of the cycle,the power automatically switches off.  
4
 
WASHING PROCEDURE  
Before starting washing, check the following;  
Put the laundry into the washer and add detergent, too.  
Be careful not to overload. Use right detergent  
for the fabrics you are washing.  
Connect the water supply hose to the water tap. Leave a tap  
open. Plug the power cord in. Make sure to lay down the  
drain hose. (In case no drain pump)  
START/  
HOLD  
FUZZY(DIGITAL) COURSE  
Selects the best washing course  
SPEEDY COURSE  
Because washing is speedy, it is  
POWER  
COURSE  
START/  
POWER  
HOLD  
automatically.  
good for light or less stained laundry.  
1. Press the power button to "ON".  
2. Press the course select button three times.  
3. Press the START/HOLD button  
Water level is selected automatically.  
Washing, rinsing, and spinning follow.  
If you want to pause, press the START/HOLD  
button again.You can change the course when paused.  
4. Close the lid.  
Select the Silver Wash button to perform anti-bacteria  
washing.  
1. Press the POWER Button to"ON".  
2. Press the START/HOLD button.  
Water level is selected automatically.  
Washing,rinsing, and spinning follow.  
If you want to pause, press the START/HOLD  
button again.You can change the course when paused.  
3. Close the lid.  
Select the Silver Wash button to perform anti-bacteria  
washing.  
START/  
HOLD  
POWER  
COURSE  
BLANKET COURSE  
START/  
HOLD  
POWER  
COURSE  
WOOL COURSE  
1. Press the power button to "ON".  
2. Press the course select button once.  
3. Press the START/HOLD button  
Water level is selected automatically.  
Washing, rinsing, and spinning follow.  
If you want to pause, press the START/HOLD  
button again.You can change the course when paused.  
4. Close the lid.  
Select the Silver Wash button to perform anti-bacteria  
washing.  
1.Press the power button to "ON".  
2.Press the course select four times.  
3.Press the START/HOLD button.  
Washing,rinsing, and spinning follow.  
If you want to pause, press the START/HOLD  
button again.You can change the course when paused.  
4. Close the lid.  
CAUTION . . .  
-Do not use water above 30˚C for WOOL washing.  
-Refer to the tag attached on the clothes for washing  
information.  
-Fasten buttons and turn inside out before washing.  
-Use the detergent indicated in the laundry.  
-When the degree of dirt is extreme, soak the laundry in warm  
water for about 10 minutes before pressing the WOOL course  
button in order to enhance washing efficiency.  
In the Wool course, the Silver Wash course does not  
work as it could damage the washed items.  
START/  
HOLD  
SUPER CLEAN COURSE POWER  
Use for cleaner washing.  
1. Press the power button to "ON".  
2. Press the course select button two times.  
3. Press the START/HOLD button and put  
the proper amount of detergent into tub.  
Water level is selected automatically.  
COURSE  
Water level is only selected MAXIMUM ~ MEDIUM.  
4. Close the lid.  
The washing finishes by the time you reserved.  
The tempering feature is included in the Super Clean  
course. This is why the additional tempering course is  
not selected.  
Select the Silver Wash button to perform anti-bacteria  
washing.  
5
 
WASHING PROCEDURE  
DELAY  
START  
START/  
HOLD  
COURSE  
POWER  
DELAY START  
Select this course when  
you have to go out or do something else.  
1. Press the power button to "ON".  
2. Press the course select button.  
3. Press the DELAY START button once.  
You may change the delay start time with  
use the DEALY START button. (from 3 hours to 18 hours)  
4. Press the START/HOLD button and put  
the proper amount of detergent into tub.  
5. Close the lid.  
The washing finishes by the time you reserved.  
SILVER  
WASH  
START/  
HOLD  
SILVER WASH BUTTON  
A course where bacteria hidden  
POWER  
inside the laundry are removed before it is Silver Wash-coated  
for avoiding the propagation of harmful germs.  
1. Press the power button to "ON".  
2. Press the SILVER WASH button.  
3. Press the START/HOLD button.  
4. Close the lid.  
- This can only be selected when WASH, RINSE  
and SPIN are all selected.  
- When the Silver Wash course is selected, manual-  
ly selecting the (function) keys is not allowed.  
- This toggles On/Off each time the button is pressed.  
- This is available as an option for all courses other than the  
Wool course.  
6
 
MANUAL FUNCTIONS  
Each washing course changes manually.  
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button  
SOAK FUNCTION (Including WASH, RINSE, SPIN)  
Press the POWER button.  
Select the course(Press the course button).  
FUZZY(DIGITAL), BLANKET, SUPER CLEAN, SPEEDY, WOOL  
Press the FUNCTION SELECT button once.  
Press the START/HOLD button once.  
START/  
HOLD  
FUNCTION  
POWER  
COURSE  
Water level is selected automatically.  
once  
Washing,rinsing, and spinning follow.  
When the Silver Wash course is selected, the tempering feature is already  
included in this course so manually selecting Tempering is not allowed.  
WASH ONLY  
Press the POWER button.  
Press the FUNCTION SELECT button twice.  
Press the START/HOLD button once.  
START/  
HOLD  
POWER  
FUNCTION  
Washing goes on for 18 minutes.  
When the FUNCTION button is pressed during washing, the wash  
time can be changed to between 3 and 25 minutes in duration.  
twice  
RINSE ONLY  
Press the FUNCTION button three times.  
Press the START/HOLD button once.  
Rinsing goes on for 15 minutes.  
START/  
HOLD  
POWER  
FUNCTION  
When the FUNCTION button is pressed during rinsing, the rinse  
times can be changed to between 1 to 5 times in duration.  
three times  
SPIN ONLY  
Press the FUNCTION button four times.  
Press the START/HOLD button once.  
Spin drying goes on for 11 minutes.  
When the FUNCTION button is pressed during spinning,  
the spin time can be changed to from 1 to 7 minutes.  
START/  
HOLD  
POWER  
FUNCTION  
four times  
WASH AND RINSE  
Press the FUNCTION button five times.  
Press the START/HOLD button once.  
START/  
HOLD  
POWER  
FUNCTION  
Washing and rinsing go on for 38 minutes.  
When the FUNCTION button is pressed during working, the rinse  
times can be changed to between 1 to 5 times in duration.  
five times  
RINSE AND SPIN  
Press the FUNCTION button six times.  
Press the START/HOLD button once.  
START/  
HOLD  
POWER  
FUNCTION  
Rinsing and spin drying follow.  
When the FUNCTION button is pressed during working, the rinse  
times can be changed to between 1 and 5 times in duration.  
six times  
7
 
INSTALLATION & MAINTENANCE  
The User’s Manual is for common use.  
Make use of the User’s Manual depending upon your washing machine model.  
ENVIRONMENT  
Never install the washer near water.  
Leave some space  
Do not place the washer in steamy rooms or where the  
washer is directly exposed to rain.Moisture may destroy the  
electrical insulation causing an electrical shock hazard.  
Avoid direct sunlight or heaters.  
As plastic and electrical components are affected by direct  
heat,never place the washer near furnaces, boilers, etc.  
Do not place under direct sunlight.  
Maintain at least 10cm between the washer and the wall.  
Place the washer on a sturdy flat surface.  
If the washer is placed on an uneven or weak surface,  
noise or vibration occurs. (Allowable is 1˚)  
Adjust the legs for even placement.  
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.  
So, make sure that the washer is leveled properly.  
LEVELLING  
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING  
THE POSITION OF THE WASHING TUB.  
1. Adjust the side horizontally  
first and the front  
Open the lid of the machine, pour water into the tub up to the level  
just below the pulsator, and adjust the legs so that the pulsator is  
positioned at the center of the water as shown in the figure.  
in same direction next.  
2. If the thread is not  
within the limit, adjust  
the height of  
Place the machine more than  
10cm away from the wall.  
the legs.  
Adjust the legs on feet  
for levelling .  
Loosen  
Lock  
CONNECTING THE WATER SUPPLY HOSE  
1. Remove the adaptor  
5. Connect the other end of the water  
from the water supply hose.  
supply hose to the inlet water valve  
at the back of the washer.  
Screw the hose clockwise all the  
way in.  
2. First,using a "+" type screw  
driver, loosen the four screws  
on the adaptor. Next,take the  
adaptor and turn part(b) fol-  
lowing the arrow for gap about  
5mm between them.  
5-1.Connect the other end of the water  
supply hose to the inlet water valve  
at the top of the washer.  
a
b
Screw the hose clockwise all the way in.  
3. Connect adaptor to the  
water tap by tightening the  
screws firmly. Then, turn  
part (b) following the arrow  
and put (a) and (b)together.  
If the water tap is a screw type,assemble  
a water supply hose that fits to the  
tap as shown.  
a
b
4. Connect the water supplyhose  
to the adaptor. Pull down the  
part (c) of the water supply  
hose .When the part (c)is  
released, the hose is automati-  
cally connected to the adaptor  
making a 'click' sound.  
NOTICE After completing connection, if water leaks from the hose,  
then repeat the same steps.  
Use the most conventional type of faucet for water supply.  
In case the faucet is square or too big,remove the spacing  
ring before inserting the faucet into the adaptor.  
c
Note : The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not be  
used.  
8
 
ASSEMBLING THE RAT PROTECTION PANEL  
2.If you have difficulty  
1.Insert the rat  
protection panel  
to the assembling  
hole on front side  
to the end.  
inserting the panel  
lift up the washer a  
little and insert it  
IN CASE OF PUMP-DRAINED WASHER  
Take out the cap-hose and Be sure to join tightly the drain hose into  
Be sure to join tightly the drain  
hose into the drain-outlet  
on the side of the machine.  
Install the drain hose in the  
position of about 90~100cm  
above the ground.  
connect the outlet-hose.  
the drain-outlet on the back of the  
machine.  
cap-hose  
outlet-hose  
(a)  
CONNECTING THE DRAIN HOSE  
After pressing the joint ring(a), insert the drain hose(b)  
to drain direction.  
(b)  
HOW TO PUT THE DETERGENT IN  
1.Open the detergent box by pulling in the direction of the arrow as shown in the  
figure and then put the powder detergent in the detergent box.  
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.  
Detergent Device  
Put the detergent  
in proportion to  
water level  
Softener Device  
Softener  
baseline  
CAUTION : If softener is stored over the above base line, it may flow down at any time.  
9
 
WATER SUPPLY CONNECTOR FILTER  
inlet water  
valve  
1.Pull out the filter and wash well.  
2. Pull in the filter and connect  
the hose to the inlet water  
valve tightly.  
3. Check if there is a leakage.  
Note to tighten up the  
connector.  
CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.  
1. Push the upper part  
of the filter and pull in.  
2. Open the cover as  
shown in the figure.  
3. Clean the filter.  
4. Close the cover and insert the  
lower part of the filter in the  
basket first and then push the  
filter with "click" sound .  
HOW TO CLEAN THE FILTER  
1. Place a rag under the washer filter not to wet the floor.  
2. Rotate the filter counterclockwise  
and pull out the filter.  
3. Remove dirts and rotate  
the filter clockwise  
(pump drained washer)  
1.Place a rag under washer filter not to wet the floor.  
2.Turn the filter-cap to the left.  
3.Take the filter out and  
remove dirts.  
open close  
until it locks in position.  
4. Reassemble in  
reverse order.  
10  
 
TROUBLESHOOTING  
Washing machine won't work  
Is the water tap opened?  
Is the washer plugged in?  
Is the power cut off?  
Spinning does not work  
Is the laundry spread out evenly  
in the washer?  
Is the washer set on a sturdy  
flat surface?  
Is there enough water?  
Water is not supplied  
Is the water tap opened?  
Is the water cut off?  
Is the water supply hose or hose  
connection clogged?  
Water is overflowed  
Restart after spinning.  
If the error sign still indicates,  
call agency.  
Is the water tap frozen?  
If water is not supplied in 1 hour,a  
buzzer will sound, and the remaining  
time indicator will show "4E".  
Water dose not drain  
Is the drain hose down?(No pump)  
Is the drain hose frozen?  
Is the drain hose clogged?  
If the water dose not drain in 15  
minutes, a buzzer will sound,  
and the remaining time indicator  
will show "5E".  
11  
 
IN CASE THE NEED FOR SERVICING ARISES.  
If any problem occurs with your products,do not hestitate to call any nearby.  
Name, address, telephone number is required.  
SPECIFICATIONS  
MAXIMUM  
75 l  
426W  
WASH  
POWER  
HIGH  
62 l  
CONSUMPTION  
STANDARD  
WATER LEVEL  
MED  
LOW  
53 l  
42 l  
28 l  
270W  
SPIN  
DIMENSIONS(mm)  
W605xD665xH1000  
EXTRA LOW  
42 kg  
195  
l
WEIGHT  
WATER USAGE  
0.05~0.78 MPa  
(0.5 ~ 8.0 kg f/cm )  
PULSATOR  
ROTATING SPEED  
WATER PRESSURE  
WASHING TYPE  
100 rpm  
680 rpm  
2
.
Stirring Type  
SPIN SPEED  
 

PYLE Audio TV Mount PSW117ET1 User Guide
RCA Camcorder CC6151 User Guide
RCA CRT Television F25339 User Guide
RF Link Technology Stereo Receiver DAV 2450 User Guide
Ryobi Blower RY08554 User Guide
Samsung All in One Printer SCX 6322DN User Guide
Sanus Systems Indoor Furnishings VMCT User Guide
Sanyo Flat Panel Television DP37819 User Guide
Sears Typewriter 090 User Guide
Seiko Group Stereo Receiver STX1 User Guide