Seiko Watch CAL 6A32 User Guide

Cal. 6A32  
INSTRUCTIONS  
(P.  
3)  
BEDIENUNGSANLEITUNG  
INSTRUCTIONS  
ISTRUZIONI  
(S. xx)  
(P. xx)  
(P. xx)  
(P. xx)  
(P. xx)  
(xx )  
INSTRUCCIONES  
INSTRUÇÕES  
用法説明  
 
CONTENTS  
Page  
TIME/DATE SETTING...............................................................................................  
HOW TO CHECK AND ADJUST THE CALENDAR ..................................................  
6
7
HOW TO OPERATE THE SCREW LOCK TYPE CROWN......................................... 13  
BATTERY CHANGE .................................................................................................. 13  
SPECIFICATIONS..................................................................................................... 15  
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR  
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.  
3
 
CAL. 6A32  
PERPETUAL CALENDAR  
Once set, the calendar automatically adjusts for odd and even months including  
February of leap years up to February 28, 2031. After 2032, adjust the year manually  
following the procedures in “HOW TO CHECK AND ADJUST THE CALENDAR.”  
It indicates the year, month, and date.  
Before using the w atch:  
Because the calendar is preadjusted at the factory, you only need to set the  
time and date, and the calendar will automatically update itself.  
Before using the watch, set the time and date correctly following the procedures  
in “TIME/DATE SETTING.”  
 
4
Hour hand  
Minute hand  
a
b
c
CROWN  
6
Date  
Second hand  
a : Norm a l p osition  
b : First c lic k  
c : Se c ond c lic k  
5
 
TIME/ DATE SETTING  
CROWN  
Pull out to second click when Second hand  
is at the 12 o’clock position.  
6
Turn in either direction to set the time and  
date.  
Push back completely in accordance with  
a time signal.  
1. The date changes between 11:00 p.m. and 1:00 a.m. while the watch is in operation or when advancing  
the hands by turning the crown clockwise, and between 9:00 p.m. and 10:00 p.m. when moving the  
hands back by turning the crown counterclockwise. Therefore, note the following.  
[AM/ PM checking]  
*When setting the hour hand, check that AM/PM is correctly set.  
*When setting the time by advancing the hands, turn the hour hand past the 1 o’clock marker. If the date  
advances, the time is set for the AM period. If it does not change, the time is set for the PM period.  
*When setting the time by turning back the hands, turn the hour hand past the 9 o’clock marker. If the  
date moves back, the time is set for the PM period. If it does not change, the time is set for the AM  
period.  
2. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back  
to the exact time.  
 
6
3. If the calendar indication is not correct after setting the time and date, check that AM/PM is correctly set.  
If the calendar indication is still not correct even though AM/PM is correctly set, the initial position of the  
calendar may not be set correctly. In such a case, adjust the initial position of the calendar following the  
procedures in "HOW TO CHECK AND ADJUST THE CALENDAR."  
HOW TO CHECK AND ADJ UST THE CALENDAR  
Follow the procedures below to check the calendar, and if necessary, to adjust it.  
Do not check and adjust the calendar between 11:00 p.m. and 1:00 a.m. If the calendar  
is checked and adjusted between 11:00 p.m. and 1:00 a.m., the date may not change  
properly. In such case, first change the time to any time outside this period, and then  
set the date. After that, move the hands back to the correct time.  
If the crown is pulled out to the second click while the numeral in the calendar frame  
is advancing or moving back, the second hand may be misaligned from the 12 o’clock  
position (initial position).  
The button and crown operation cannot be made while the numeral in the calendar  
frame is advancing or moving back. Press the button or turn the crown after the  
numeral stops.  
If the watch is left untouched for more than 2 or 3 minutes while checking or adjusting  
the calendar, the watch will resume normal movement. In such a case, start again  
from the beginning of the procedures in “HOW TO CHECK AND ADJUST THE  
CALENDAR.”  
Do not leave the crown at the first or second click when you use the watch, as this will  
shorten the battery life.  
7
 
1. Starting the check and adjustm ent of the calendar  
CROWN  
Pull out to first click.  
6
2. The initial position of the second hand  
BUTTON  
Press for 2 seconds.  
The second hand will move and stop at the 12  
o’clock position (initial position). The nu-  
meral in the calendar frame will automati-  
cally move and stop to show “1.”  
1
* If the second hand is not set at the 12 o’clock position,  
turn the crown clockwise or counterclockwise to set  
the second hand to the 12 o’clock position.  
* The second hand advances or moves back in 1-second  
increments when the crown is turned until it clicks.  
 
8
3. The initial setting of the calendar  
BUTTON  
Press once.  
The numeral in the calendar frame will swing  
and stop (the numeral remains as “1”).  
1
* If the numeral is not set to “1,” turn the crown  
clockwise or counterclockwise until “1” appears in  
the calendar frame, and place “1” in the middle of the  
frame by turning the crown slowly.  
4. Current date  
BUTTON  
Press once.  
The second hand will move back and stop at  
the 9 o’clock position. The numeral in the  
calendar frame will return to the current date.  
6
* If the numeral in the calendar frame does not return to  
the current date, turn the crown clockwise or  
counterclockwise to set the numeral to the current  
date.  
* If the crown is turned continuously, the numeral  
moves quickly. To stop the numeral, turn the crown  
in the reverse direction until it clicks once.  
9
 
5. Current m onth  
BUTTON  
Press once.  
The second hand will advance and stop at the  
10 o’clock position. The current month will be  
shown in the calendar frame.  
7
* If the current month is not shown in the calendar  
frame, turn the crown clockwise or counterclockwise  
to set the numeral to the current month (the numeral  
changes between 1 and 12).  
6. Current year  
BUTTON  
Press once.  
The second hand will advance and stop at the  
11 o’clock position. The last 1 or 2 digits of the  
current year will be shown in the calendar  
frame.  
5
* If the current year is not shown in the calendar frame,  
turn the crown clockwise or counterclockwise until  
the last 1 or 2 digits of the current year are shown.  
* See the YEAR TABLE to confirm the last 1 or 2 digits  
of the current year.  
 
10  
7. Com pleting the check and adjustm ent of the calendar  
CROWN  
Press once.  
Push back in to the normal position. The  
watch will resume normal movement (the  
watch hands will show the current time again).  
The numeral in the calendar frame will return  
to the current date.  
6
11  
 
YEAR TABLE  
Need to adjust the year manually  
No need to adjust the year manually  
Year  
Last 1 or 2  
digits of  
the year  
Number of years  
since  
the last leap year  
Year  
Year  
Year  
4
5
6
7
8
leap year  
1 year  
2 year  
3 year  
-
2032  
2033  
2034  
2035  
2036  
2037  
2038  
2039  
2040  
2041  
2042  
2043  
2044  
·
2060  
2061  
2062  
2063  
2064  
2065  
2066  
2067  
2068  
2069  
2070  
2071  
2072  
·
2088  
2089  
2090  
2091  
2092  
2093  
2094  
2095  
2096  
2097  
2098  
2099  
2005  
2006  
2007  
2008  
2009  
2010  
2011  
2012  
2013  
2014  
2015  
2016  
·
4 year(leap year)  
9
1 year  
2 year  
3 year  
10  
11  
12  
13  
14  
15  
16  
·
4 year(leap year)  
1 year  
2 year  
3 year  
4 year(leap year)  
·
·
·
·
·
·
·
·
·
·
·
4 year(leap year)  
1 year  
28  
29  
30  
31  
2028  
2029  
2030  
2031  
2056  
2057  
2058  
2059  
2084  
2085  
2086  
2087  
2 year  
3 year  
 
12  
HOW TO OPERATE THE SCREW LOCK TYPE CROWN  
(for m odels w ith screw lock type crow n)  
To unscrew the crow n:  
Turn the crown counterclockwise. (Then, pull it out for setting the time or checking the calendar)  
To screw in the crow n:  
With the crown at the normal position, turn it clockwise while pressing it.  
BATTERY CHANGE  
The miniature battery which powers your watch should last  
approximately 4 years . However, because the battery is inserted at  
4
Years  
the factory to check the function and performance of the watch, its  
actual life once in your possession may be less than the specified period.  
When the battery expires, be sure to replace it as soon as possible to  
prevent any malfunction. For battery replacement, we recommend that  
you contact an AUTHORIZED SEIKO DEALER and request SEIKO  
SR927SW(SB-AP) battery.  
* If the calendar checking function is used frequently, the battery life may be less  
than the specified period.  
13  
 
Battery life indicator  
When the second hand starts moving at two-second intervals instead of the normal  
one-second interval, replace the battery with a new one as soon as possible.  
Otherwise, the watch will stop operating in a couple of days  
* The time accuracy is not affected even if the second hand is moving at two-second intervals.  
* While the second hand is moving at two-second intervals, the date will not change. This is not a  
malfunction.  
Checking and adjustm ent of the calendar after battery change  
After the battery is replaced with a new one, be sure to check that the calendar is  
correct. If the watch does not indicate the year, month and date correctly, adjust the  
calendar. (See “HOW TO CHECK AND ADJUST THE CALENDAR.”)  
WARNING  
Do not rem ove the battery from the w atch.  
If it is necessary to take out the battery, keep it out of the reach of children. If  
a child sw allow s it, consult a doctor im m ediately.  
 
14  
CAUTION  
Never short-circuit, heat or otherw ise tam per w ith the battery, and never  
expose it to fire. The battery m ay burst, becom e very hot or catch fire.  
The battery is not rechargeable. Never attem pt to recharge it, as this m ay cause  
battery leakage or dam age to the battery.  
SPECIFICATIONS  
1
Frequency of crystal oscillator ................ 32,768 Hz (Hz = Hertz … Cycles per second)  
2
Loss/gain (Monthly rate) ......................... ±20 seconds at normal temperature range (5° C ~ 35° C)  
(41° F ~ 95° F)  
3
4
5
6
7
Operational temperature range ............... –10° C ~ +60° C (14° F ~ 140° F)  
Driving system ........................................ Step motor for the time indication  
Battery .................................................... SEIKO SR927SW(SB-AP), 1 piece  
Battery life indicator  
IC (Integrated Circuit) .............................. C-MOS-LSI, 1 piece  
* The specifications are subject to change without prior notice for product improvement.  
15  
 

Q See Camcorder QSICB2 User Guide
Radio Shack Conference Phone 43 3601 User Guide
Radio Shack Cordless Telephone 43 3905 User Guide
RCA DVD Player RC5220P User Guide
RCA TV VCR Combo T13066 User Guide
Ricoh Digital Camera R1v User Guide
Roland Electronic Keyboard AT15 User Guide
Roland Speaker System GI 20 User Guide
Rotel Stereo Amplifier RMB 1565 User Guide
Ryobi Outdoor Trimmer BC30 ZR30004 User Guide