RCA TV Antenna ANT1750F User Guide

ANT1750F  
Multi-Directional Slim Digital Antenna /  
Antena multidireccional plana para interiores /  
Antenne numérique mince multidirectionnelle  
User’s Guide / Guía del Usuario / Guide de l’utilisateur  
FCC Statement  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device  
may not cause harmful interference, and (2) this device must accept any interference received, including interference that  
may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to this equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the radio or television off and on, the user  
is encouraged to try to correct interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on another circuit.  
Consult the dealer or an experienced radio/TV technician for help.  
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s  
authority to operate this equipment.  
Industry Canada Regulatory Information  
CAN ICES-3 (B)/NMB-3 (B)  
Avis d’Industrie Canada  
CAN ICES-3 (B)/NMB-3 (B)  
Congratulations on your purchase of the ANT1750F Multi-Directional Slim Digital Antenna.  
With this contemporary antenna, rabbit ears are a thing of the past. This sleek, attractive  
antenna features the most advanced technology, including a patented engineering design that  
provides excellent reception for both analog and digital TV broadcasts.  
Multi-Directional Antennas  
A multi-directional antenna is able to receive signals from any direction. Useful for both  
analog and digital reception, the ANT1750F looks great, facilitates optimal reception,  
and requires very little space. The patented multi-directional technology ensures that the  
antenna does not need to be adjusted according to the location of the transmitting signal.  
1
 
a metal surface may interfere with reception. If the antenna isn’t performing as well as  
expected, try moving it away from the component or placing it on another surface. Then,  
re-scan for channels on your TV or converter box.  
Positioning the Antenna  
After locating the optimal position for your antenna, choose from one of three options:  
Lay the ANT1750F flat The ANT1750F has raised feet on its bottom to prevent  
scratching of furniture. Make sure you place the antenna on a flat, level surface.  
Note: This is the position that usually gives optimal performance.  
Hang the ANT1750F The back of the ANT1750F antenna has two mounting holes  
that can be used for hanging. Place both holes over screws inserted in your wall. A higher  
placement may deliver better performance.  
Stand the ANT1750F upright The ANT1750F comes with a removable stand.  
Simply place the antenna in the stand to prop the antenna in an upright position.  
Connecting the ANT1750F  
You can use the ANT1750F with or without its amplifier, depending on which connection  
gives you the best signal. Try using the amplifier first. If you notice that you’ve lost channels  
that you normally receive, try connecting without the amplifier.  
You can connect the ANT1750F directly to your TV or use it with a converter box.  
To connect the ANT1750F with the  
amplifier directly to your TV:  
ANT1750F  
Built-In  
Coaxial Cable  
2
1. Make sure your TV is turned off.  
2. Connect the ANT1750F’s built-in cable  
to the input jack of the amplifier.  
ANTENNA  
Amplifier  
Insert  
TV/STB  
3. Connect the amplifier’s built-in cable to  
the antenna input on your TV.  
3
4
4. Plug the amplifier’s power cord into an  
electrical outlet.  
TV  
5
Important: This power unit should be  
plugged in so that it stays vertical or lies flat.  
5. Re-scan for channels on your TV.  
3
 
To connect the ANT1750F without the  
amplifier directly to your TV:  
ANT1750F  
Built-In  
Coaxial Cable  
2
1. Make sure your TV is turned off.  
2. Connect the ANT1750F’s built-in  
coaxial cable to the antenna input on  
your TV.  
TV  
3
3. Re-scan for channels on your TV.  
To connect the ANT1750F with the  
amplifier to a converter box:  
Built-In  
Coaxial Cable  
ANT1750F  
2
1. Make sure your converter box is turned  
off.  
ANTENNA  
TV/STB  
2. Connect the ANT1750F’s built-in cable  
to the input jack of the amplifier.  
Amplifier  
Insert  
5
3
Converter Box  
6
3. Connect the amplifier’s cable to the  
antenna input on the converter box.  
4. Connect the converter box to your TV  
using either audio/video cables or a  
coaxial cable:  
4a  
Audio/Video –or– Coaxial  
Cables Cable  
4b  
a. Audio/Video cable connection:  
Connect the video (yellow) and stereo  
audio (red and white) cables to the  
video and audio outputs on your  
converter box. Connect the other ends  
to the video and audio inputs on your  
TV. Make sure you match the colors  
of the jacks on each—yellow plug to  
yellow jack, red plug to red jack, and  
white plug to white jack.  
TV  
b. Coaxial cable connection: Connect a  
coaxial cable to the antenna output on  
your converter box. Connect the other  
end of the coaxial cable to the antenna  
input on your TV.  
4
 
5. Plug the amplifier’s power cord into an  
electrical outlet.  
Important: This power unit should be  
plugged in so that it stays vertical or lies flat.  
6. Re-scan for channels on your converter  
box.  
To connect the ANT1750F without the  
amplifier to a converter box:  
ANT1750F  
Built-In  
Coaxial Cable  
1. Make sure your TV is turned off.  
2
2. Connect the ANT1750F’s built-in  
coaxial cable to the antenna input on  
your converter box.  
Converter Box  
4
3. Connect the converter box to your TV  
using either audio/video cables or a  
coaxial cable:  
3a  
3b  
Audio/Video –or– Coaxial  
Cables Cable  
a. Audio/Video cable connection:  
Connect the video (yellow) and stereo  
audio (red and white) cables to the  
video and audio outputs on your  
converter box. Connect the other ends  
to the video and audio inputs on your  
TV. Make sure you match the colors  
of the jacks on each—yellow plug to  
yellow jack, red plug to red jack, and  
white plug to white jack.  
TV  
b. Coaxial cable connection: Connect a  
coaxial cable to the antenna output on  
your converter box. Connect the other  
end of the coaxial cable to the antenna  
input on your TV.  
4. Re-scan for channels on your converter  
box.  
Notes: See your converter box’s owner’s  
manual for more detailed connection  
instructions.  
5
 
Coaxial Cable Installation Precautions  
• Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause  
shorts and can change a cable’s impedance.  
• Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds  
during installation. After installation, make sure there is no tension on the cable.  
• Use only round-headed staples. Any clamps or securing devices used with coax should  
grip the cable evenly about the circumference without crushing the cable. Flat staples can  
damage the coaxial cable.  
• Do not expose a coaxial cable to a temperature greater than 176 degrees Fahrenheit. Keep  
the cable away from heating vents and water heaters.  
12 Month Limited Warranty  
VOXX Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should  
this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship  
within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s  
option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the  
product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage  
(e.g. dated bill of sale), specication of defect(s), transportation prepaid, to the Company at the address shown below.  
Do not return this product to the Retailer.  
This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or  
Canada. The Warranty does not extend to the elimination of externally generated static or noise. This Warranty does  
not apply to costs incurred for installation, removal or reinstallation of the product, or, if in the Company’s opinion,  
the product has been damaged through acts of nature, alteration, improper installation, mishandling, misuse, neglect, or  
accident. This Warranty does not cover damage caused by an AC adapter not provided with the product.  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR  
OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY  
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING  
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,  
SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY  
WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN  
A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.  
No person or representative is authorized to assume for the Company any liability other than expressed herein in  
connection with the sale of this product.  
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of  
incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives  
you specic legal rights and you may also have other rights which vary from state/province to state/province.  
U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788  
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5  
©2013 VOXX Accessories Corporation  
Indianapolis, IN  
Trademark(s) Registered  
All other brands and product names are trademarks or registered  
trademarks of their respective owners.  
Product specifications are subject to change.  
Printed in China  
6
ANT1750F_IB_02  
 

Radio Shack Electronic Keyboard 42 4062 User Guide
Radio Shack Home Security System 49 2514 User Guide
Radio Shack PDAs Smartphones 96K User Guide
RCA Flat Panel Television D40W135D User Guide
RCA MP3 Player TC1702 User Guide
REI Digital Camera VPC 64 User Guide
Roper Range FEP350Y User Guide
Salton Electric Steamer RHST3 User Guide
Samsung Washer SW81ASP User Guide
Sanyo Battery Charger UR18650H User Guide